Without ridge vents, your roof won’t get the proper airflow circulating across the exterior of the roof, and they serve to draw out moist air from the attic and pull fresh air back in. If moist air is left for a long time, it can cause mold growth in the attic and your roof will slowly begin to rot. Ensuring your ridge vents are installed properly is important because you want to be able to let the warm air out to avoid any problems. If you notice any loose seams or fasteners, this is a result of the ridge vents not being installed properly and you’ll want to get them repaired immediately.
Warning Signs to Look Out For When Your Ridge Vent Isn’t Properly Installed
There are different things to look out for in your home or commercial business to ensure it’s in good standing. The ridge vent system must be in good running order, and if it isn’t installed properly, it will end up costing you more in the long run. It’s always best to consult with a roofing company to assess the situation so that you have a better understanding of what to look out for, and they’ll be able to help you with all your roofing needs.
Attic Leaks
Leaks are one of the most common and obvious signs to look out for, and if you’ve been noticing a smell of mold or water coming in through the ceiling, then chances are your ridge vents are leaking from your attic space and this should be taken care of by a professional roofing contractor. We provide both commercial roofing services and residential roofing services and offer shingle over ridge vent and aluminum ridge vent installation.
Ridge Vent Leaks
There could be several reasons why your ridge vents are leaking, including improper nailing or shabby work that was previously done by a roofing company. If the roofing nails were too short or even if the wrong nails were used during the installation, it can cause the ridge vents to be less secure. Ridge vent leaks should be taken care of immediately, especially if you don’t want to run the risk of mold build-up in your home or business.
Roof Shingle Obstructions
Shingle obstructions are often caused by improper installation, improper use, or improper materials, and some things to look out for are when the shingles are damaged at the top, or if the siding is missing one end, is bent down, or is otherwise damaged. In this case, roof repair would be required as the ridge vents would also be compromised.
Roofing companies have all the knowledge and expertise when it comes to your roofing needs, and whether it’s to replace ridge vents, or you want to inquire about roofing materials, roof replacements, or roof inspections for your residential or commercial property, it’s always best to get in contact with a roofing contractor to make an informed decision.
Are Your Ridge Vents Clogged?
There are many reasons why your ridge vents can become clogged, the most common being dust, mildew, and mold buildup. In most cases, it takes years before this accumulation happens but it’s always good to take precautionary measures to avoid any growth from starting in the first place. Animals nesting may be another reason your ridge vents are clogged, and this happens because it’s a dry and warm location so it’s an ideal hangout for them. No matter what the reason is, ensuring your ridge vents work properly will cause fewer issues in the future.
Inspecting the Ridge Vent From Your Attic
The next step is to inspect the attic for signs of moisture build-up, and the best way to do this is from the attic by looking along the bottom of the roof for any wet patches. By doing this, you’ll be able to check and fix the problems before they get worse.
Another way to inspect the ridge vent from your attic is by turning on the attic light and where the rafter is, you should be able to visibly see a light from the side of the house. This indicates the ridge vents aren’t clogged up and light and air can travel through the ridge vent system without any issues.
Conclusion
For the most part, your ridge vents should be low maintenance if properly maintained, but it’s recommended to clean them at least once a year to avoid any future mishaps. By taking extra precautions your ridge vents will be problem-free and it will be one less thing to worry about.
Always look to hire the best roofing company to ensure the job gets done in a timely and efficient manner. Not only will you get quality materials, but you’ll also get an extremely professional and knowledgeable team that knows the ins and outs of roofing.